Homeward bound Click on sail
The brightwork, topsides and bottom have all been
prepared. She is now awaiting the final coats of paint, varnish and antifouling,
before she is launched.
HAINES BOATYARD
XOD Epoxy Cont
The hull was then epoxy filled. After a number of
coats of epoxy and primer the boat was turned back over.
The keel is then refitted with the new keel bolts and the
deadwood re-attached The rudder is also re-hung
This procedure will make the hull watertight and stiffer and add many years of improved
performance.
